Showing posts with label tarnish. Show all posts
Showing posts with label tarnish. Show all posts

Tuesday, August 28, 2012

Does your silver tarnish?

In the past 6 years I’ve lost count of the number of times I’ve been asked this question…

It is clear to me many people are not aware sterling, argentium and fine silver will tarnish over time!  How fast sterling silver tarnishes depends on a number of things.  One contributing factor is how pure silver is.  Sterling silver is 92.5% silver and 7.5% another metal, usually copper; copper is one of the contribute factors to sterling silver tarnishing faster than fine silver.  This is due to the interactions between the silver, copper and sulfide in the air.  The sulfides are found in smoke from burnt raw fuel such as coal or oil, strong smelling foods such as eggs and onions, some fish or shell fish and of course air pollution.  I have actually blackened sterling silver a number of times with a hard-boiled egg by putting the egg yolk and the silver item in a baggy and letting sit until the silver “tarnished”, usually about 24 hours.    Some medications, particularly antibiotics can cause silver to tarnish, this I’d not heard of before.  During the tarnishing process it starts out as a yellowing effect, eventually going dark.  Humidity will result in silver tarnishing faster than usual.   Some people have more acid in there system and may see a discoloration on their skin while wearing silver!

Silver wire that is badly tarnished…it was bagged but not sealed and in the bottom of my silver container under many other bags, for some time...

 I've used sterling silver a great deal over the years and my experience has been some silvers tarnish much faster than others...which makes me believe the makeup of some silver has more copper or different additives as something is definitely different in order for it to tarnish at a faster rate?   The silver items are stored in the same place in the same manner.   I've made a point to purchase my sterling silver from one supplier for this reason and have consistently better results with regards to the issue of tarnishing.
Fine Silver is 99.9% pure silver, it tarnishes at a slower rate than sterling silver…the tarnish will generally be a discoloration rather than a dark tarnish as in the sterling silver, unless it is in an area where there are high pollution and sulpher levels, then it is more likely to be darker. Even so it is usually easier to clean and keep clean fine silver than sterling silver.

To prevent tarnish:
  •  One way to help prevent tarnish is to avoid contact with oils, salts and acids on your body…wiping your jewelry     after wearing will help prevent tarnish as our skin is a natural transfer for oils, acids and salts.   This particular statement is surprising to me, as my experience is the more I wear my silver jewelry pieces the less they tarnish…
  • Place jewelry in a baggy with an anti tarnish tab, this works…
  • I have always said the more you wear your jewelry the less it will tarnish…this has worked consistently for me, even though it isn’t supposed to?
  • Silica gel desiccant packets, the ones you get in shoe boxes, work well in a baggy to prevent tarnish! 
  • Apply a coat of Renaissance Wax; this is a microcrystalline food safe wax from England.  I’ve used this on occasion, but it is a wax, I don’t like the application process and it leaves a matt finish, which I don’t care for..it isn’t my favorite thing to use.
  • Apply a coat of Protectaclear…something I’m going to try.  Non toxic when dry, coating to last 10 years…
  • Apply nail polish but this will have to be done often as it wears/chips off very easily. Apply Vintaj Glaze…this is a metal sealer made specifically for metal jewelry.  I’m working with this glaze right now.   This product "Conforms to ASTM D-4236", which is a USA regulatory requirement for art materials, school supplies and toys such as crayons, paint sets, or modeling clay that parents, teachers and child care givers look for.
  • One other thing you can do is look for jewelry that is rhodium plated…this will not tarnish.  I purchase chain and findings that are rhodium plated when I can find.   Or you can buy jewelry that has already been oxidized; this jewelry will continue to oxidize but it won’t be noticeable the way it would be on bright silver.   I for one love the look of shiny, bright silver, but if someone requested a piece oxidized I’m happy to do that!

The difference after the top wire was cleaned with a cloth for a few seconds!

How to clean your jewelry
  • Simply wash your jewelry with a mild detergent that does not contain phosphate based chemicals when it is only slightly yellowing it will clean it up right away. Dry thoroughly...
  • Invest in a good cleaning cloth…rub your jewelry after you take it off to remove any beginning tarnish.  I generally do this before I wear a piece.
  • There are many silver polishes and dips available… I can’t recommend one as I don’t use them.  Research them carefully if you choose this method of cleaning.  Always remember to follow the directions if you decide to use commercial cleanser as failure to do so could result in damage to your jewelry!
  • Place baking soda in the bottom of a dish, lay your piece on top, they pour boiling water over top…the baking soda will bubble up and help to clean your silver…I’ve done this and it works very well on some pieces and not so good on others…it is definitely worth a try.  NOTE: wash your jewelry with mild detergent, rinse well with water and dry after doing this as the baking soda can etch the silver finish if not completely removed!
  •  NOTE:  do not use toothpaste as this is too abrasive for sterling silver or fine silver jewelry, pearls and some gems!

As I mentioned at the beginning of this post…I’m often asked if the pieces I make  will tarnish…as you’ve just read, the answer is simply, YES, all silver will eventually tarnish, even silver plated jewelry, copper and brass…but… it really doesn’t take a great deal of work to keep it sparkling clean.  All it takes is to keep a cleaning cloth with your jewelry and give it a quick rub before you put it on, then again when you take it off, at the very least do one or the other!  Place you silver jewelry in a baggy and you should be fine…

Send an email or leave a comment on my blog if you have any questions or comments…
Cheers

Information Source:
http://www.jivejewelry.com/blog/2007/02/why-does-sterling-silver-jewelry.html
http://www.newsletter.kaijewels.com/silver-tarnish.htm

Monday, August 13, 2012

Copper is new again!


When I first began working with metal, about 4 years ago, I introduced copper to my customers but at the time there wasn’t much interest in the metal as a component of jewelry.    So I forgot about it for a while, and then tried again but still no interest until the beginning of this season.
Scraps accumulated since May 2012
Surprisingly, I’ve had many customers ask for copper pieces.    I’m happy about this as it allows me another affordable metal from which I can make pendants, earrings and cuffs.  I’ve used copper sheet a great deal this season, and will eventually get to copper wire.  

The name copper is from the Latin word cuprum, which means "from the island of Cyprus", and is man’s oldest metal, dating back some 10,000 years.
Large deposits of copper ore are located in the United States, Chile, Zambia, Zaire, Peru and Canada.  It is a soft metal to which either brass or bronze is added.   
Made last week...note the color

Copper wire is used in large amounts in electrical wire as it is highly conductive …with only silver more so.    With the high cost of silver it makes more sense to use copper for electrical purposes as it is considerably less expensive. 

 For many years, from 1942 to 1996, the Canadian penny was made from 98% copper, with varying amounts of tin and zinc additives.    From 2000 to 2012 the penny has been made from 94% steel, 1.5% nickel and 4.5% copper plating.  

 As I’m sure you are aware many other items are either made from or have components made from copper, pots, pans, kettles, bowls, telephone wiring, fridges, dryer, microwaves, automobiles have approximately 50 pounds of copper, while your average sized home has approximately 400 pounds of copper for such things as electrical wiring, water pipes and appliances.
I found all kinds of very detailed information regarding copper and how it is processed and used  but for my purposed that is going a bit to in depth…suffice it to say copper is one of man’s best friends, we have a multitude of uses for this metal.

Check out this website http://www.copper.org/education/homepage.html for more detailed, interesting information about copper.

Copper has been known for centuries to have an antimicrobial effect regarding infections.  It is said to be the most effective product for “touch surfaces” in hospitals…specific surfaces are being converted to copper allowing for an 87% reduction in infections in certain hospitals in the USA.  This conversion is in the beginning stages and is touted as a contributing factor in preventing infections in hospitals.    The antimicrobial effects was surprising to me, it is still being researched… I’d like to see what this eventually leads to. 
Made last week...note the color

 I’m one of those people who’s skin will tarnish if I wear copper…this is because of a reaction to either the acids on my skin or from lotion or soap on my copper piece.  Copper isn’t the only metal that can do this even sterling silver or gold can depending on your skin, etc, so simply avoiding inexpensive jewelry isn’t all ways going to prevent issues.   It is possible to be irritated by any metal that causes a green or dark ring around your finger.    If you are prone to green or dark rings, or irritation issues it is a good idea to remove your copper jewelry when washing or swimming, as well as keep lotions, soaps and chemicals away from your jewelry.   Some people find applying a barrier such as a polymer coating or nail polish helpful to prevent these issues…nail polish will have to be reapplied every once in a while as it will wear off.     Another thought to decrease the possibility of a reaction is to decrease your intake of acidic food and drink, although I think for most people this would be a bit of a nuisance just to wear a piece of jewelry.  Keeping your jewelry clean and tarnish free is a great way to start.
I’m sure you may have known much of this information, but do not think about it in your day to day life.   Why would you unless you work with copper.   I never think about all the great ways to utilize this metal …I use copper to make jewelry, having said that I’m sure now I will think about all the other possibilities while I’m cutting, filing, hammering, stamping and finishing my copper jewelry!

As we all know, the one drawback to copper jewelry is the fact it tarnishes very easily…the lovely copper shine turns to a green/black dull finish…what is happening is it forms corrosion due to the oxygen in the air…the good thing is once it has covered the surface with tarnish it is finished and acts as a protection to the copper piece.   There are a number of ways to slow down/prevent the tarnish…
This cuff was made over two years ago and you can see the tarnish on it...sold like this though.
  • ·         When not wearing a piece seal in a baggy making sure to eliminate the air, if you have any silica gel desiccant packets from previous purchases , the ones you get in shoe boxes, these work well in the baggy to prevent tarnish!  I have “anti tarnish tabs” that also work nicely.
  • ·         Apply a coat of Renaissance Wax; this is a microcrystalline food safe wax from England.  This I’ve used on occasion, but it is a wax and won’t last forever.
  • ·         Apply a coat of Proctectaclear…something I’m going to try.  Non toxic when dry, coating to last 10 years…sounds very good to me.
  • ·         Apply nail polish but this will have to be done often as it wears of very easily.
  • ·         If your pieces do happen to tarnish use one of the soft jewelry cleaning cloths that can be purchased at any jewelry counter…I also sell these cloths.  You will have to rub hard but they will clean your copper…at least I know my cloths will.

Copper & silver fold forming cuffs made almost 2 years ago...silver one sold right away the copper sold 3 weeks ago!
I enjoy working with copper equally as well as silver products and this coming week I’m going to try a new patina product to color the metal…watch for photos in the coming weeks…or better yet stop by at the Market and take a look!

Don’t forget questions and comments are welcome…
hjcote11@gmail.com
Cheers


NOTE:  I would like to thank all the wonderful people who ventured out to the Corn Festival at the North Bay Farmers’ Market this past Saturday, August 11th…it was supposed to be a very wet day with 90% chance of thunderstorms from mid morning on.   My daughter and I didn’t expect many people at the Market for this reason… it turned out to be one of the busier Market days I’ve seen this season!    
Thanks for visiting…
H

Information Sources: